All pieces could be fixed any place indoor, outdoor being resistant to sun, snow and rain.
Installation: The Mosaic is supplied directly from the factory, glued to a fibre mesh backing, ensuring that each of the hand-cut marble mosaic tiles remains firmly in place during shipment.
Our mosaics are hand cut mosaic tile and each tile is 3/8 inch deep and approximately 1/3 wide .
Our mosaics are made from natural colored marble so they are resistant to any weather condition , ice , sun etc...
We will ship our mosaic rolled like a carpet you just have to unroll it upon unpacking .
Installation of the Mosaic is carried out in a similar manner as installing standard ceramic tiles. Although there is not the need for the Mosaics to be installed by a professional we would recommend this for larger Mosaics.
To install it on the wall or on the ceiling , you can glue it to a wood panel and fix the wood panel to the wall.
STEP 1: Remove the paper backing from the mosaic and gently remove any excess glue.
STEP 2: Install Floor or Wall Tile Adhesive to the area in which the mosaic is to be installed.
STEP 3: Place and level the Mosaic into the Tile Adhesive, utilising a wooden block to even the level of the Mosaic Tiles.
STEP 4: After 24hrs, apply Tile Grout to the Mosaic, removing any access grout with a damp cloth prior to in drying.
STEP 5: Once the Tile Grout is dry, apply a Marble Tile Sealant (available from most leading DIY stores) to the Mosaic to seal the marble and bring out the individual characteristics of each tile.
STEP 6: Enjoy the life-long beauty of your very own, individual Marble Mosaic.
|